Need Help: Windows Networking issue
I'm posting this here as it'll catch more views, so here goes:
my laptop is connected by an Ethernet cable that ultimately has 3 separate routers on it, each assigning Dynamic IP addresses to the clients in the physical network. One of them is my cousin's 192.168.0.1. The other two were 192.168.1.1, till I temporarily changed one of them (lets call it Z) to assign 192.168.2.1 just to avoid conflicts. I could only do this by chance when suddenly my laptop got connected to this Z network instead of the others. I must tell you that I do not have physical access to any of them.
The Problem: Whenever I'm doing ipconfig /release - renew, I'm always getting automatically getting connected to 192.168.1.1. Windows just wont connect me to any of the other IP networks (most importantly my cousin's router network, or Z). I went to the advanced TCP/IPv4 settings under "Obtain IP...Automatically" and added "192.168.0.1" as Default Gateway, with Automatic Metric selected to my Properties.
However. After saving this, when I renew my DHCP lease I am still connected to 192.168.1.1. Ipconfig /all shows that under Default Gateway 192.168.1.1 comes first, then 192.168.0.1 is underneath it. Regardless I'm still connected to the router 192.168.1.1. Point to consider: I dont have admin access to this router.
Now I tried with automatic metric deselected and a value of 50 placed, I tried restarting my laptop... but everytime I'm still connected to 192.168.1.1.
I really need a solution for this on how to bypass this one router and get through to the others from my end. I'm assuming the way I successfully do this will also let me change Z back to 192.168.1.1.
Here's what I need: I have to get into my cousin's router 192.168.0.1 and need to configure it. After that is done, I need to get into router Z (192.168.2.1) and reset it to 192.168.1.1. Is there any way I can exclude my laptop from seeking an IP from 192.168.1.1 and 192.168.2.1 at any one time, while seeking my cousin's 192.168.0.1 router?
FYI: all of them share the same subnet I think 255.255.255.0, which I cant change without access.
p.s: If theres a way I can do this from Ubuntu Linux too, I can try it. My objective is that I'll define the Gateway IP address (192.168.0.1) and my computer will get a (dynamically assigned) IP from that router.
|